High Performance in Tight Space
An Exclusive Project of BG LIFT Engineers Team, realized with best materials and Hi-Tech Technologies.
The best possible union between Power and Performance combined to an incredible Compactness, unimaginable until today.The light dimensions and the millimetric movements manoeuvrability allow to operate in extremely Narrow spaces, normally inaccessible to other cranes of the same class
Technical specifications CWE 525
|Max capacity||14515 Kg / 3,01 m|
|Max outreach (6S version)||16,85 m|
|Max outreach with Jib (version 6S+JIB 6S HD)||29,40 m|
|Max hook height (6S version)||20 m|
|Max hook height with Jib (version 6S+JIB 6S HD)||32,5 m|
|Slewing angle-speed||Continuous / 1,5 rpm|
|Winch||First layer pull 1900 Kg
Rope lenght 90 m
Speed in direct pull 50 m / min.
|Radio remote control||Steady Can-Bus + Color|
|Stability system||Dynamic stability area calculation
|Weights||Standard crane (6S Version): 13200 Kg
Jib (6S): 1000 kg
Electric motor 15Kw/400 V - 200 kg
Winch: 250 kg
Mobile ballast: 3800 kg
Rubber pads: 135 kg
|Crawler crane traction||Trasmission: Moto-reducer
Scope: 160 l
Pressure: 225 Bar
Speed: 1,2 - 2,2 K/h
Max slope degree: 25°
Max pressure on the ground: 1,05 Kg/Cm²
Traks width: 350 mm
Max. outrigger load: 18000 daN
|Diesel engine||Brand: Yanmar
Model: 4TNV98CT-N STAGE 5
Max power: 55 Kw - 74,8 Hp
Max torque: 291 Nm
Tank capacity: 75 l
Every Function Under Control
The multifunction proportional radio control provided with an integrated control display, permits as well to verify in real time all the parameters of the machine.
No Limits Rotation
The removable Ballast mounted on the Chassis permits the continuous “in shape” Rotation.
Always Ready to Work
The “X” configuration allows to operate with narrow outriggers and minimum obstruction.
Easy To Drive
The Machine can level and operate on steep grounds.
Load & Transport
The compactness and the wide ground clearance angle allows the crane to be loaded using Short ramp.
Jib Over Line
Noteworthy Jib Length and Load.
Electric Engine Always Allowed
15 Kw Three Phases Electric Engine, 400V inverter controlled.
Stabilizzazione in pendenza
The outriggers of CWE 525 Range, Provided With Cross Beams System, confer to the Crane Chassis an incomparable torsion resistance always keeping extremely Compact the machine Dimensions in rest position.The outriggers cylinders, solid with extended stroke, Simplify the Crane Endurance on strongly steep grounds.
A large Employment of high enervation limit special steels, such as STRENX 1300, allow to limit the weight in order to take advantage of the performance; especially with more external loads on the top of the Jib.
The generous ground clearance angle permit to load the machine as well on truck with short ramps; simplifying the manoeuvres and optimizing loading time.
“Short ray” Performance
CWE 525 is Built with very low barycentres which, combined to the Cross Beams Geometry, Permit to develop the full power and cover heavy and voluminous loads (Machines Tools and other)
Load Limit Stability (Progress)
The integrated control system give to the Crane infinite Stabilization possibilities, Automatically upgrading the load limiting device to the situation determined by the position of each outriggers; permitting the operator to completely work in safety conditions and, simultaneously, setting configurations unthinkable until today.
Positive Angle for Hard Access
The second Articulated Telescopic Boom and the Hydraulic Jib have angular operating system respectively of 15° and 20° Over the Horizontal alignment of the boom.This situation allow to operate inside buildings and give the possibility to overcome obstacles such as lofts, front door and Beams.
- Radio remote control with display for crawler, chassis and crane function.
- Continuous rotation
- Links on all the crane articulations
- Variable speed oil fan cooler
- Predisposition for winch installation
- Predisposition for Jib Installation
- Predisposition for two man baskets installation
- Outriggers continuous variations Control system
- Removable ballast
- Two speed crawler translation
- Engine manual rpm increment
- N° 4 lifting connections
- N° 4 removable outriggers plates
- Electronic limiting device
- Auto diagnostic
- Crane color yellow RAL 1007
- Crawler color black RAL 9005
- According to EN12999.
- Scanreco Can-Bus + display
- Hydraulic Jib with opening up to 200°
- Quick-faster hydraulic connection
- Hydraulic line for accessorize
- Manual extensions
- Lowered hook connections
- Lowered connections for vacuum glass lifters
- Two man capacity baskets CE
- Direct pull winch up to 4th fall
- Vacuum glass lifters
- Working LED lightson the boom
- Working LED lightson the crawler
- Towing winch
- Electric generator
- Removable large box
- Removable loading flat bed
- Three phases electric engine15 Kw/400 V with inverter
- Bigger plates for outriggers
- LED lights for outriggers
- Rubber pads
- No marking rubber pads
- Green oil